REX Flaring Tools & Kits
- RX-275 LM flaring kit
RX-275 LM REX Flaring Tool Kit
| TECHNICAL SPECIFICATION | |
| PART NO. | SPECIFICATION |
| RX-275 LM | For 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2″, 5/8” & 3/4” O.D Tubing.
Includes – 5 swage adapters which cover 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4” |
- RX-278 LM Flaring Kit
RX-278 LM REX Flaring Tool Kit
| TECHNICAL SPECIFICATION | |
| PART NO. | SPECIFICATION |
| RX-278 LM | For 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2″, 5/8” & 3/4” O.D Tubing.
Includes – 5 swage adapters which cover 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4” along with Tube Cutter & Ratchet Spanner. |
REX Flaring Tool 525 – AM
- Insert tubing into adjustable opening of tube holding assembly. Position end of tubing approximately 1/8″ above the surface of holder．
- Tighten clamp screw approximately 1/2″ to 3/4″ of a turn beyond free travel position to secure tubing．
- Be certain flaring cone surface is oiled. Slip yoke over tube holding assembly center on tubing. Twist yoke clockwise to lock in position. Turn yoke handle clockwise to flare.
- For 3/16″ to 5/8″ & 5mm to 16mm O.D.
This rex flaring tool can be used for the following sizes – 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″
REX Flaring Tool RX – 195